Click link to Wiring Diagram.
IlluminationRemoval and Installation
REMOVAL
Disconnect the battery cable from the negative terminal.
Remove display unit display unit finisher RH and LH. Refer to Removal and Installation.
Remove display unit cover. Refer to Removal and Installation.
Remove the mounting screws of the display unit .
Pull the display unit upward, the ...
Inspection and Adjustment
SYSTEM INITIALIZATION
Perform additional service for operating the power window control system normally after installing rear door glass. Refer to Work Procedure.
FITTING INSPECTION
Check that the glass is fitted securely into the sash groove.
Lower the glass slightly [approximately 10 to 20 mm (0. ...
Removal and Installation
CAUTION:
Never damage rear door panel.
REMOVAL
CAUTION:
Fully open rear door.
Remove pull handle cap.Apply protective tape (A) on rear door finisher to protect it from damage.
Remove pull handle cap using a remover tool (A).
Remove rear door finisher fixing screws .
Remove inside handle cap.App ...