Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Work Flow

DETAILED FLOW

INTERVIEW FROM THE CUSTOMER

CAUTION:

>>

GO TO 2.

CHECK SYMPTOM

CAUTION:

>>

GO TO 3.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

  1. Ignition switch OFF (Auto ACC function OFF) to ON.

  2. Perform self-diagnosis for “ABS”.

Is DTC detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.

NO>>

GO TO 6.

RECHECK THE SYMPTOM

With CONSULT

  1. Erase self-diagnostic results for “ABS”.

  2. Ignition switch OFF (Auto ACC function OFF) → ON → OFF (Auto ACC function OFF).

  3. Perform DTC confirmation procedures for the error-detected system.

    NOTE:

Is DTC detected?

YES>>

GO TO 5.

NO>>

REPAIR OR REPLACE ERROR-DETECTED PART

With CONSULT

  1. Disconnect 12V battery negative terminal.

  2. Repair or replace error-detected parts.

  3. Reconnect part or connector after repairing or replacing.

  4. Connect 12V battery negative terminal.

  5. When DTC is detected, erase self-diagnostic result for “ABS”.

    CAUTION:

    Ignition switch OFF (Auto ACC function OFF) → ON → OFF (Auto ACC function OFF) after erase self-diagnosis result.

>>

GO TO 7.

IDENTIFY ERROR-DETECTED SYSTEM BY SYMPTOM DIAGNOSIS

Can the error-detected system be identified?

YES>>

GO TO 7.

NO>>

FINAL CHECK

With CONSULT

  1. Check the reference value for “ABS”.

Is the symptom reproduced?

YES>>

GO TO 3.

NO>>

INSPECTION END

Diagnosis and Repair Work Flow
...

Diagnostic Work Sheet
DESCRIPTION INTERVIEW SHEET SAMPLE Interview sheet Customer name MR/MS Registration number Initial year registration Vehicle type VIN Storage date Engine / Traction motor Mileage km (Mile) ...

Other materials:

Clamps
Generally speaking, when a body has to be straightened, the pulling device and the body must be attached to each other and the body itself must remain stationary. For this purpose, various clamps are used. Common types of clamps and their characteristics are listed below: DIRECTIONAL CHARACTERISTICS ...

Removal and Installation
WARNING: REMOVAL Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation. Remove height sensor from upper link. (With dynamic digital suspension and electronic air suspension) Refer to Removal and Installation. Set suitable jack under lower link. CAUTION: Never damage lower link. Separ ...

CONSULT Function and System Application1
FUNCTION Mode Function All DTC Reading Display all DTCs or diagnostic items that all ECUs are recording and judging. Work Support This mode enables a technician to adjust some devices faster and more accurately. Self Diagnostic Results Retrieve DTC from ECU and display diagnostic items. Dat ...

© 2014-2026 Copyright www.niarmada.com
 
0.006