Nissan Armada 2025-2026 Service and Repair Manual: Work Flow
DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
CAUTION:
>>GO TO 2.
CHECK SYMPTOM
CAUTION:
>>GO TO 3.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.
NO>>INSPECTION END
PERFORM DTC DIAGNOSIS PROCEDURE
With CONSULT
Perform DTC confirmation procedures for the error-detected system.
NOTE:
Is DTC detected?
YES>>GO TO 5.
NO>>REPAIR OR REPLACE ERROR-DETECTED PARTS
Repair or replace error-detected parts.
Reconnect part or connector after repairing or replacing.
When DTC is detected, erase self-diagnosis results for “CHASSIS CONTROL”.
GO TO 6.
FINAL CHECK
With CONSULT
Check the reference value for “CHASSIS CONTROL”.
Is the symptom reproduced?
YES>>GO TO 3.
NO>>INSPECTION END
Diagnostic Work Sheet
Description
INTERVIEW SHEET SAMPLE
Interview sheet Customer name MR/MS Registration number Initial year registration Vehicle type VIN Storage date Engine / Traction motor Mileage km ( Mile) ...
Other materials:
Diagnosis Procedure
CHECK THE LENS
Check that the surface of the lens is clean (No dust, No water mist, No damage, etc).
Is it clean?
YES>>
GO TO 2.
NO>>
Clean the lens with a cleaning cloth.
CHECK THE WINDSHIELD
Check that the windshield in front of the driving recorder is clean (No dust, No water mist, ...
Commercial Service Tools
Tool name Description Ball joint remover
Removing ball joint for suspension arm
Removing hub bolt
Drive shaft puller
Removing drive shaft joint sub assembly Sliding hammer
Removing drive shaft Power tool
Loosening bolts and nuts ...
Exploded View
Final drive mounting bracket Rear final drive assembly Upper stopper Lower stopper Washer : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...
0.0052