Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
CHECK VIN
Check the VIN of the vehicle and note it. Refer to Information About Identification or Model Code.
>>GO TO 2.
PERFORM VIN REGISTRATION
With CONSULT
Ignition switch ON and engine stopped.
On CONSULT screen, select “ECM”>>“Work support”>>“VIN REGISTRATION”.
Follow the instruction of CONSULT display.
END
Vin Registration
VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced.
NOTE:
Accurate VIN which is registered in ECM may be required for Inspection & Maintenan ...
Accelerator Pedal Released Position Learning
Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It mu ...
Other materials:
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of “MULTI AV” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
Is any ...
Removal and Installation
REMOVAL
Remove front heater & cooling unit assembly. Refer to Removal and Installation.
Disconnect front air mix door motor (passenger side) harness connector .
Remove sub harness from front case lower assembly.
Remove cooler packing.
Remove fixing screws , and then remove heater pipe suppor ...
Hydraulic Piping
Front disc brake Connector ABS actuator and electric unit (control unit) Electrical brake control unit Rear disc brake Brake hose Brake tube : Flare nut : Union bolt ...
0.0057