Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure

Mac Key Writing

When replacing ECM, it is necessary to write MAC key to ECM. Write MAC key to ECM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure. CAUTION: During MAC k ...

Engine Oil Data Reset

The oil control system allows calculating the remaining distance to drive before oil change request. The engine oil data reset must be performed after engine oil is changed. (For details, refer to Wor ...

Other materials:

Work Flow (Without EXP-800 NI and GR8-1200 NI)
Before performing a alternator test, make sure that the 12V battery is fully charged. A 30-volt voltmeter and suitable test probes are necessary for the test. Before starting, inspect the fusible link. Use fully charged 12V battery. OVERALL SEQUENCE DETAILED FLOW PRELIMINARY INSPECTION Perform the ...

Body Sealing
WARNING: The following figure shows the areas that are sealed at the factory. Sealant that is applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffected parts to come into contact with the sealan ...

Work Procedure
WARNING: UNIT CHARACTERISTIC VALUE CONFIRMATION Confirm the 5-digit alphanumeric unit characteristic value written in the QR code pasted on the side or top of the transfer assembly. : Side surface : Top surface NOTE: There is space on the top to check with the camera. >> GO TO 2. WRITING ...