- Precautions
- Additional Service When Replacing Adas Control Unit 2
- Pre-Inspection for Diagnosis
- Steering Torque Calibration
- Mac Key Writing
- Vin Registration
- Adas Control Unit 2
Other materials
Precautions for Removing Battery Terminal
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time ev ...
Rear Automatic Air Conditioning System
Work Procedure
DESCRIPTIONThe purpose of the operation inspection is to check that the individual system operates normally. NOTE:
Check that front automatic air conditioning system operates normally. Refer to Work Procedure. Check condition
: Engine running at normal operating temperature.
OPERA ...
Second Seat Cushion Finisher
Disassembly and Assembly
CAUTION:
When disassemble, always use a remover tool that is made of plastic to prevent damage.OUTSIDE SEAT CUSHION FINISHER OUTERDisassemblyDisengage fixing pawls, and then remove reclining knob cap.
: Pawl
Disengage fixing portion using a remover tool (A) according ...