Description
Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure.
| Function | Condition | Procedure |
|---|---|---|
| Memory (Steering column) | Erased | Perform memory storing |
Work Procedure
REPLACE STEERING COLUMN CONTROL MODULE
Replace steering column control module. Refer to Removal and Installation.
>>
GO TO 2.
PERFORM THE STEERING COLUMN POSITION LEARNING
Perform the steering column position learning. Refer to Description.
>>
GO TO 3.
MEMORY STORING
Perform memory storing. Refer to Description.
>>
WORK END
Other materials
Basic information
WARNING
Never leave children, individuals who require assistance, or pets unattended
inside the Nissan Armada. They may unintentionally operate vehicle systems or
place themselves and others at risk of injury. In addition, on hot and sunny
days, the interior temperature of a parked Niss ...
With Vdc Tools and Preparation
Preparation
Special Service Tool
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
Tool number
(TechMate No.)
Tool name
Description
KV991J0080
(NI-45741-A)
ABS active wheel sensor tester
Checking operation of wheel sensors
...
Driver Assistance System Tools and Preparation
Preparation
Special Service Tools
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name Description
—
(J-46534)
Trim Tool Set
Removing trim components
—
(1–20–2851–1)
ICC alignment kit*
Uses for radar alignme ...