Description
Perform the steering column position learning when the following conditions are performed. For details, refer to Work Procedure.
- Replacing steering column control module.
- Steering column does not operate normally.
Work Procedure
CHOOSE METHOD
There are two ways of learning method.
Which method do you choose?
With CONSULT>>GO TO 2.
Without CONSULT>>GO TO 3.
WITH CONSULT
With CONSULT
-
Ignition switch ON.
-
Perform "Steering column position learning� in "Work support" mode of "STEERING COLUMN� using CONSULT.
>>
WORK END
WITHOUT CONSULT
Without CONSULT
-
Disconnect battery terminal.
-
Connect battery terminal.
-
Activate exit assist function. Refer to exit assist function system.
>>
WORK END
Other materials
Rear Oil Seal
Removal & Installation
REMOVALRemove transmission assembly, refer to the following:
2WD models: Refer to Removal and Installation.
4WD models: Refer to Removal and Installation.
Remove drive plate. Refer to Removal and Installation.
Remove rear oil seal with a suitable tool.
CAUTION:
B ...
Back Door Lock
Exploded View
Back door touch sensor*1
Back door lock & closure assembly
Back door panel
Back door stay lower bracket
Spindle unit*1
Spindle unit bracket upper*1
Bracket cover*2
Hands free control unit*2
Hands free sensor bracket*2
Hands free sensor upper*2
Hands free ...
Hood Seal
Removal and Installation
REMOVALApply protective tape (A) on the part to protect it from damage.
Disengage hood seal fixing clips using a remover tool (A), and then remove hood seal .
INSTALLATIONInstall in the reverse order of removal. ...