Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Adjustment of Brake Caliper Initial Position

Description

CAUTION:

When performing the following operations, always use CONSULT (It cannot be performed by any means other than CONSULT.), for performing "Initialization position adjustment" of "Work support". Refer to Work Procedure.

×: Required —: not required

Procedure Initialization position adjustment
Removing/ installing ABS actuator and electric unit (control unit) —
Replacing ABS actuator and electric unit (control unit) ×
Removing/ installing rear brake pad (When not pressing piston of rear brake caliper assembly) —
Removing/ installing rear brake pad (When pressing piston of rear brake caliper assembly) —
Replacing rear brake pad ×
Removing/ installing rear brake caliper assembly —
Replacing rear brake caliper assembly ×
Removing/ installing parking brake switch —
Replacing parking brake switch —

Work Procedure

PERFORM INITIALIZATION POSITION ADJUSTMENT

  1. Select "ABS", "Work support", and "Initialization position adjustment" according to this order.

    CAUTION:

    • Never operate the parking brake switch.

    • Never depress the brake pedal.

  2. Touch "START".

>>

GO TO 2.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

  1. Ignition switch OFF (Auto ACC function OFF) to ON.

  2. Erase self-diagnosis results memory of "ABS".

  3. Pull parking brake switch to activate electric parking brake.

  4. Push parking brake switch to release electric parking brake.

  5. Perform self-diagnosis for “ABS�.

Is malfunction detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

INSPECTION END

    Other materials

    Precautions
    Precautions for Removing Battery Terminal When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal� described below. NOTE: Some ECUs operate for a certain fixed time even after ignit ...

    Rear Door Weather-Strip
    Removal and Installation REMOVALApply protective tape (A) to rear door panel around rear door weather-strip fixing clips for preventing damage. Disengage fixing clips on the reverse side of rear door weather-strip using a remover tool (A). : Clip CAUTION: Never damage rear door panel. ...

    Power Outlet. Power Socket
    Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT PRE-TENSIONER�, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front ...