When there is excessive clearance on the upper part of door:
Apply a wood block between the outer sill and the lower side of door, and push the upper part of door.

When there is excessive clearance on the lower part of door.

Adjustment Fitting of Front Fender
Partial Replacement of Panel (welded Panel)Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of “Wireless charger” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if “Wireless charger” is not di ...
Disassembly and Assembly
DISASSEMBLY
Remove drain plug and gasket from rear cover and drain gear oil.
Remove filler plug and gasket from rear cover.
Remove the side oil seals. Refer to Removal and Installation.
Remove rear cover mounting bolts () and remove the rear cover .
Remove stud bolt from rear cover.
NOTE:
It i ...
PRECAUTIONS FOR POP UP ENGINE HOOD : Precautions
WARNING:
Always observe the following items for preventing accidental activation.
Before removal or installation of the pop-up engine hood and harness, always OFF the ignition switch, disconnect the battery negative terminal, and wait for 3 minutes or more. (To discharge the accumulated electricity ...