Nissan Armada 2025-2026 Service and Repair Manual: Back Pillar Reinforcement

Inner Rear Pillar

WARNING: Work after rear fender, inner rear pillar reinforcement, and back pillar reinforcement are removed. Remove the welding point for easier installation. Urethane foam : Vehicle front : Weld ...

Rear Panel

WARNING: : Vehicle front : Weld the parts onto the back of the component part. : Welding method, the number of welding points, and the tightening torque apply to both sides of the vehicle. : N•m (k ...

Other materials:

Removal and Installation
REMOVAL Remove rear door finisher. Refer to Removal and Installation. Disconnect rear door lock assembly harness connector. Disengage rear door lock knob cable fixing clip. Remove rear door inner frame rear. Refer to Removal and Installation. Remove rear door outside handle bracket. Refer to Removal ...

Work Flow
DETAILED FLOW INTERVIEW FROM THE CUSTOMER Clarify customer complaints before inspection. First of all, perform an interview utilizing reproduce symptoms as well as fully understand it. Ask customer about his/her complaints carefully. Check symptoms by driving vehicle with customer, if necessary. Ref ...

Work Procedure
CAUTION: Always use CONSULT for the decel G sensor calibration and side G sensor calibration. (It cannot be adjusted other than with CONSULT.) CHECK THE VEHICLE STATUS Steer the steering wheel to the straight-ahead position. Stop the vehicle on level surface. Stop the engine. Ignition switch OFF (A ...