The air suspension system in the Nissan Armada automatically adjusts the vehicle height based on driving conditions and driver-selected preferences, providing enhanced comfort, performance, and versatility.
The standard ride height of the Nissan Armada is set to "NORMAL", but the system allows adjustment to three additional levels depending on driving needs and terrain.
- "HIGH" mode increases ground clearance, improving off-road capability and allowing the Nissan Armada to navigate rough terrain more effectively.
- "AERO" mode lowers the vehicle height at higher speeds, improving aerodynamics and fuel efficiency.
- "ACCESS" mode reduces the vehicle height to make entering and exiting the Nissan Armada easier, as well as simplifying loading and unloading of cargo.
Regardless of passenger count or cargo load, the Nissan Armada air suspension system automatically maintains the selected height, ensuring consistent ride quality and stability.
NOTE:
- During height adjustment, mechanical or air system noises may be heard. This is a normal characteristic of the Nissan Armada air suspension system and does not indicate a malfunction.
- When the vehicle height changes while the brake pedal is applied, slight noises from brake components may occur. This is expected behavior and does not indicate a fault.
Other materials
Towing your vehicle
Basic information
When towing a Nissan Armada, it is essential to comply with all applicable local
and regional regulations. Using incorrect towing methods or equipment can lead to
serious vehicle damage.
For safe and proper towing, it is highly recommended that a professional towing
service ...
Unexpected Brake Pedal Reaction
Diagnosis Procedure
A malfunction of brake pedal feel (height or others) is detected when the brake pedal is depressed.CHECK AXLE
Check that there is no significant looseness of axle.
Front axle
2WD models: Refer to Inspection.
4WD models: Refer to Inspection.
Rear axle: Refer to Inspectio ...
Additional Service When Replacing Ipdm E/r
Description
After replaced IPDM E/R, it is necessary to perform control unit configuration. For details, refer to Work Procedure.
Work Procedure
REPLACE IPDM E/R
Replace IPDM E/R. Refer to Removal and Installation.
>>
GO TO 2.
WRITING vehicle SPECIFICATION
Perform configuration (IPDM E/R). R ...