Brake assist
The Brake Assist system in the Nissan Armada is designed to enhance braking performance during emergency situations. When the system detects that the driver is applying the brake pedal with significant force, it automatically increases braking pressure beyond what a conventional brake booster would provide, even if the pedal is not fully depressed.
This advanced feature in the Nissan Armada helps reduce stopping distances in critical moments by ensuring maximum braking force is applied as quickly as possible, supporting safer driving under sudden braking conditions.
WARNING
The Nissan Armada Brake Assist system is intended solely as a support feature and must not be relied upon as a collision warning or avoidance system. The driver remains fully responsible for maintaining awareness, controlling the vehicle, and driving safely at all times.
Anti-lock Braking System (ABS)
Basic information
WARNING
- The Anti-lock Braking System (ABS) in the Nissan Armada is an advanced
safety feature designed to help maintain steering control during braking, especially
on slippery surfaces. However, it cannot compensate for unsafe driving behavior
or prevent all accidents.
Stopping distances may be longer on wet, icy, gravel, or snow-covered roads—even with ABS active. The same applies when using tire chains. Always maintain a safe following distance and adjust your driving to road conditions. The driver of the Nissan Armada is ultimately responsible for safe operation.
- The type, condition, and size of tires installed on the Nissan Armada
directly affect braking performance.
- Always use the recommended tire size on all four wheels to ensure proper ABS functionality.
- When using a spare tire, verify that it matches the specifications listed on the Tire and Loading Information label.
The ABS system in the Nissan Armada prevents the wheels from locking during heavy braking or when braking on slippery surfaces. It continuously monitors wheel speed and adjusts brake fluid pressure to maintain traction and stability.
By preventing wheel lockup, the Nissan Armada ABS allows the driver to maintain steering control, helping to avoid obstacles and reducing the likelihood of skidding or spinning.
Using the system
Press the brake pedal firmly and maintain steady pressure when braking in the Nissan Armada.
Do not pump the brake pedal. The ABS system automatically modulates brake pressure to prevent wheel lockup.
Continue steering the Nissan Armada as needed to avoid hazards while braking.
WARNING
Do not pump the brake pedal in a Nissan Armada equipped with ABS, as this can increase stopping distances and reduce braking effectiveness.
Self-test feature
The Nissan Armada ABS system includes sensors, hydraulic components, and an onboard computer that performs a self-diagnostic test each time the engine is started and the vehicle begins moving at low speed.
During this self-test, you may hear a brief "clunk" sound or feel a slight pulsation in the brake pedal. This is normal and confirms that the system is functioning correctly.
If a malfunction is detected, the Nissan Armada will disable ABS and illuminate the ABS warning light. In this case, the braking system will continue to operate normally but without anti-lock functionality.
If the ABS warning light remains on during driving, the Nissan Armada should be inspected as soon as possible. It is recommended to visit an authorized NISSAN dealer for diagnosis and repair.
Normal operation
The ABS system in the Nissan Armada typically operates at speeds above approximately 3 to 6 MPH (5 to 10 km/h), depending on road conditions.
When the system detects that one or more wheels are about to lock, it rapidly applies and releases brake pressure. This action may cause a pulsation in the brake pedal, as well as noise or vibration from the engine compartment.
These sensations are normal and indicate that the Nissan Armada ABS is actively working to maintain traction and control. However, they may also signal slippery or hazardous road conditions, so extra caution should be exercised.
Other materials
Warning and indicator lights
Red light
Brake warning light
Charge warning light
Electric power steering warning light
Electric shift control system warning light
Electronic parking brake warning light
Engine oil pressure warning light
Hands OFF warning light
Master warning light
...
Memory Function Does Not Operate
All Component
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
PERFORM MEMORY STORING
Perform MEMORY STORING. Refer to Description.
Check memory function operation.
Does i ...
Calibration of Automatic Back Door Position Information
Description
When the following work is performed, it is necessary to perform initial setting of automatic back door position information to operate automatic back door system. Refer to Work Procedure.
After removing and installing, or replacing back door assembly
After removing and installing, or ...