Removal and Installation
Exploded ViewHow to Handle Battery
CAUTION:
After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
WHERE TO CONNECT JUMPER CABLE WHEN THE 12V BATTERY IS DISCHARGED
CAUTION:
If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster ...
Removal and Installation
REMOVAL
CAUTION:
Never damage the rear door panel.
Fully open rear door glass.
Apply protective tapes (A) on the part to protect it from damage.
Disengage rear door outside molding fixing pawls of front and rear side using remover tool (A) and (B).
CAUTION:
Never lift rear door outside molding ...
Removal and Installation
REMOVAL
Remove front heater & cooling unit assembly. Refer to Removal and Installation.
Remove front heater core. Refer to Removal and Installation.
Remove front expansion valve. Refer to Removal and Installation.
Disconnect front mode door motor harness connector .
Remove sub harness from fro ...