Removal and Installation
With Tail LampREAR VIEW CAMERA : Removal & Installation
REMOVAL
Remove back door finisher. Refer to Removal and Installation.
Remove the rear view camera mounting screws , then remove the rear view camera .
INSTALLATION
Install in the reverse order of removal.
NOTE:
Adjust the guide line position if the guide line position is shifted after installing t ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Removal and Installation
REMOVAL
CAUTION:
Never give axial impact to steering column assembly during removal.
Never move steering gear assembly when removing steering column assembly.
Never rotate the steering shaft when removing steering column assembly.
Set vehicle to the straight ahead position.
Place the tilt to the ...