Irregularities in the panel must be examined carefully to see whether or not they can be repaired, and also to determine the most suitable repair method.
Refer to "Examination of Panel Damage".
Work Direction on a Vehicle

| 1 | Area mainly accessed from the back to the front |
| 2 | Area mainly accessed from the front the back |
| 3 | Area mainly accessed from the bottom |
For each panel and each general part of a panel it is important to consider the light position, direction of the light position and the work direction.
Polishing of Panel Surface and Anti-corrosive Treatment
Glue SystemWork Procedure
Perform camera calibration and perform writing to the around view monitor control unit, after removal/installation or replacement of each camera or camera mounting parts (front bumper molding center, door mirror, or others), or replacement of around view monitor control unit.
Parts name Operatio ...
Diagnosis Procedure
CHECK SYSTEM SETTING
Check system setting. Refer to Description.
Check exit assist function operation.
Does it operate normally?
YES>>
Exit assist function is normal.
NO>>
GO TO 2.
CHECK DOOR SWITCH (DRIVER SIDE)
Check door switch (driver side). Refer to Component Function Check.
Is t ...
Removal and Installation
CAUTION:
Always work with 2 workers, because it is heavy weight.
REMOVAL
Remove headrest.
Slide second seat to front most position.
Remove rear side mounting bolts of second seat assembly.
Slide second seat to rear most position.
Disengage fixing pawls using a remover tool (A) according to numerica ...