
![]() | High-mounted stop lamp harness | ![]() | Rear spoiler | ![]() | High-mounted stop lamp |
![]() | : Pawl | ||||
![]() | : N·m (kg-m, in-lb) | ||||
Removal and InstallationRemoval and Installation
REMOVAL
Remove front heater & cooling unit assembly and front blower unit assembly. Refer to Removal and Installation.
Disconnect front mode door motor harness connector .
Remove fixing screws , and then remove front mode door motor.
INSTALLATION
Install in the reverse order of removal. ...
Removal and Installation
REMOVAL
Remove spiral cable assembly. Refer to Removal and Installation.
Remove steering angle sensor from spiral cable.
INSTALLATION
Note the following, and install in the reverse order of removal.
When replacing the angle sensor , if the lock pin is installed, remove the lock pin after installing ...
Work Flow
DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
CAUTION:
>>
GO TO 2.
CHECK SYMPTOM
CAUTION:
>>
GO TO 3.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Ignition switch OFF (Auto ACC function OFF) to ON.
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>
Record or print self-di ...