Removal and Installation
REMOVAL
Front Door Parting Seal Front
Fully open front door.
Apply protective tape (A) to front door panel around front door parting seal front for preventing damage.

Disengage fixing clips on the reverse side of front door parting seal front using a remover tool (A), and then remove front door parting seal front.

![]() |
: Clip |
Front Door Parting Seal Rear
Fully open front door.
Apply protective tape (A) to front door panel around front door parting seal rear for preventing damage.

Disengage fixing clips on the reverse side of front door parting seal rear using a remover tool (A), and then remove front door parting seal rear.

![]() |
: Clip |
INSTALLATION
Install in the reverse order of removal.
Other materials
Back Door Trim
Exploded View
Back door panel
Back door upper garnish
Back door side garnish RH
Back door lower finisher
Back door pull handle
Back door finisher cap*1
Automatic back door switch finisher*2
Back door inner finisher
Back door side garnish LH
: Clip
: Pawl
: Metal ...
Intelligent Key Unit
Removal and Installation
REMOVALCAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.Remove luggage side lower finisher LH. ...
Radiator
Inspection
Check radiator for mud or clogging. If necessary, clean radiator as per the following:
Be careful not to bend or damage radiator fins.
When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connector ...
