Before starting repair work, be sure to disconnect the negative terminal of the battery.

When welding parts near the fuel tank fuel filler, be sure to remove the fuel tank. Plug the filler port of the tank.
Plug the fuel pipe and brake pipes to avoid leakage when removing connectors from the pipes.
Safety Stand
Working EnvironmentPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door inside handle fixing screws .
Remove front door inside handle fixing pawls, and then remove front door inside handle.
:Pawl
INSTALLATION
Note the following items, and then install in the reverse order o ...
Exploded View
Final drive mounting bracket Rear final drive assembly Upper stopper Lower stopper Washer : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...