Removal and Installation
REMOVAL
CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect Intelligent Key unit harness connector, and then remove Intelligent Key unit
.

INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to perform ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT when replacing Intelligent Key unit. Or not doing so, Intelligent Key unit control function does not operate normally. Refer to Description.
Other materials
Electric Power Steering Warning Lamp Does Not Turn on
Description
The power steering warning lamp does not illuminate when the ignition switch is ON (lamp check).
Diagnosis Procedure
CHECK THE POWER STEERING WARNING LAMP
Perform trouble diagnosis for the power steering warning lamp system. Refer to Component Function Check.
Is the inspection result nor ...
Additional Service When Replacing Driver Seat Control Unit
Description
Each function is reset to the following condition when the driver seat control unit is replaced. For details, refer to Work Procedure. Function Condition Procedure
Memory (Seat, steering column, door mirror)
Erased
Perform memory storing
Log-in
Erased
Perform log-in storing
W ...
Sonar Control Unit
Exploded View
Sonar control unit
: N·m (kg-m, in-lb)
Removal & Installation
REMOVALCAUTION:
Before replacing sonar control unit, perform “ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". For details, Refer to Work ProcedureRemove the luggage side lower fin ...