Removal and Installation
REMOVAL
Remove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Remove fixing screws 
and then remove lumbar support switch.
INSTALLATION
Install in the reverse order of removal.
Other materials
Starting System Tools and Preparation
Special Service Tools
Tool number
(TechMate No.)
Tool name Description
—
(—) Model GR8-1200 NI
Multitasking battery and electrical diagnostic station
Tests batteries, starting and charging systems and charges batteries.
For operating instructions, refer to diagnostic station instruction ...
Differential Lock Indicator Lamp Does Not Turn on
Description
Differential lock indicator lamp does not turn ON when turning differential lock mode switch to “ON” after engine start.
Diagnosis Procedure
CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT
Perform self-diagnosis for “DIFFERENTIAL LOCK”.
Is any DTC detected by self-diagnosis?
YES>&g ...
Configuration (ipdm E/r)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the IPDM E/R.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the IPDM E/R. For details, refer to Wor ...