Exploded View
Refer to Exploded View.
Removal and Installation
REMOVAL
CAUTION:
-
Before removing moonroof motor, check that glass lid is fully closed.
-
After removing moonroof motor, never attempt to rotate moonroof motor assembly as a single unit.
Remove headlining to make work space. Refer to Removal and Installation.
Disconnect harness connector, and then disengage harness connector assembly fixing clip.
Remove fixing screws 
, and then remove moonroof motor assembly.
INSTALLATION
CAUTION:
-
Install moonroof motor assembly and sunshade motor assembly in correct position without mistake.
-
Before installing the moonroof motor assembly, always place the link and wire of glass lid guide in the symmetrical and fully closed position.
Move the moonroof motor assembly laterally a little so that the gear is completely engaged into the wire on the moonroof unit assembly and mounting surface becomes parallel. Then secure the moonroof motor assembly with screws.
Install harness connector assembly, and then connect harness connector.
Install headlining. Refer to Removal and Installation.
CAUTION:
After installing moonroof motor assembly, perform additional service. Refer to Description.
Other materials
Water Outlet and Water Piping
Exploded View
Water hose 1
Clamp
Water hose 2
Water pipe 1
Water hose 3
Electric water pump
Bracket
Clip
Water hose 4
Drain plug
O-ring
Connector
Clip
Water hose 5
Water pipe 2
Gasket
Water hose 6
Water hose 7
Water pipe assembly
...
Front Wiper
Exploded View
REMOVAL
Front wiper blade RH
Front wiper arm RH
Front wiper arm cap
Front wiper drive assembly
Front wiper arm LH
Front wiper blade LH
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
DISASSEMBLY
Front wiper linkage
Front wiper pivot assembly
Pivot cover
...
Preset Switch
Exploded View
Front center console switch finisher assembly
Preset switch
: N·m (kg-m, in-lb)
Removal & Installation
REMOVALRemove the front center console switch finisher assembly. Refer to Removal and Installation.
Remove the preset switch mounting screw , and remove ...