Rear Door
Removal and Installation
REMOVAL
Remove rear door finisher. Refer to Removal & Installation.
Disconnect outside key antenna (rear door) harness connector.
Disengage outside key antenna (rear door) fixing clips, and then remove outside key antenna (rear door) 
.
 |
: Clip |
Disengage clip fixing pawl using a remover tool (B), and then remove clip 
.
 |
: Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse fixing clip. Always replace it with a new one when it is removed.
Rear Bumper
Removal and Installation
REMOVAL
Remove rear bumper energy absorber. Refer to Removal and Installation.
Remove harness clip .
Disconnect outside key antenna (rear bumper) harness connector.
Remove outside key antenna (rear bumper) fixing nuts 
, and then remove outside key antenna (rear bumper) .
INSTALLATION
Install in the reverse order of removal.
Other materials
Intelligent Key operating range
The Nissan Armada Intelligent Key system functions only when the key is located
within the defined operating range of the request switches 1 and 2 (if equipped).
For optimal performance, the Nissan Armada Intelligent Key must be within approximately
80 cm (31.50 in) of each request switch.
...
Jump starting
To start your Nissan Armada engine using a booster battery, it is essential to
carefully follow the proper procedures and safety precautions outlined below to
avoid damage or injury.
WARNING
Improper jump starting of the Nissan Armada can result in a battery explosion,
causing severe inj ...
Washer Level Switch
Exploded View
Washer tank
Packing
Washer level switch
Removal and Installation
WARNING:
REMOVALCAUTION:
When washer level switch is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.Remove fender protector RH. R ...