Description
The parking, license plate, side marker and tail lamps are not turned ON in any condition.
Diagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning part.
CHECK POSITION LIGHT REQUEST SIGNAL
With CONSULT
-
Select “Position light request” in “Data Monitor” mode of “IPDM E/R” using CONSULT.
-
With operating the lighting switch, check the monitor status.
Monitor item Condition Monitor status Position light request Lighting switch 1ST On OFF or AUTO* Off *: Only when the illumination judgement by auto light function is OFF.
Is the inspection result normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation.
NO>>Replace BCM. Refer to Removal and Installation.
Other materials
Transfer Control Unit
Exploded View
Transfer control unit
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking an ...
The Braking Force of Parking Brake Is Low
Description
The parking brake braking force is low and the vehicle moves backward when parked on an incline.
Diagnosis Procedure
REAPPLY THE PARKING BRAKE (1)
Pull the parking brake switch, and apply the parking brake.
Pull the parking brake switch 2 seconds ore mode.
Is the vehicle moving ba ...
Perform the Steering Column Position Learning
Description
Perform the steering column position learning when the following conditions are performed. For details, refer to Work Procedure.
Replacing steering column control module.
Steering column does not operate normally.
Work Procedure
CHOOSE METHOD
There are two ways of learning method.
Which ...