Nissan Armada 2025-2026 Service and Repair Manual: Preparation

Engine Mechanical — Preparation

...

Special Service Tool

The actual shapes of TechMate tools may differ from those of special service tools illustrated here. Tool number (TechMate No.) Tool name Description KV10116200 (NI-26336-A) Valve spring compressor 1 ...

Other materials:

Removal and Installation
CAUTION: Never reuse fuel filler base assembly. Always replace it with a new one when it is removed. REMOVAL Remove fuel filler lid. Refer to Removal and Installation. Disengage fuel filler base mask fixing pawls using a remover tool (A) into drain hole , and then remove fuel filler base mask. ...

Normal Operating Condition
When the back door position is in the range of [between "just before fully closed" and the position approximately less than 150 mm (5.91 in) from "just before fully closed" ], the back door does not operate even if any of switches are operated. To operate the back door by switches, manually close ...

ROAD WHEEL TIRE : Adjustment
WARNING: BALANCING WHEELS (BONDING WEIGHT TYPE) Preparation Before Adjustment Using releasing agent, remove double-faced adhesive tape from the road wheel. CAUTION: Be careful not to scratch the road wheel during removal. After removing double-faced adhesive tape, wipe clean traces of releasing agen ...