Preparation
Special Service Tools
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
KV10122000 (NI-53383) Side oil seal puller |
|
Removing side oil seal |
|
KV10123000 (NI-53384) Side oil seal installer |
|
Installing side oil seal |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Sliding hammer |
|
Removing side oil seal [Use with KV10122000 (NI-53383)] |
| Power tool |
|
Loosening bolts and nuts |
Sealant or/and Lubricant
| Item | Use |
|---|---|
|
Genuine Liquid Gasket (Three Bond 1217 or equivalent) |
Application to mating surface of rear cover |
Other materials
Refrigerant
Description
CONNECTION OF SERVICE TOOLS AND EQUIPMENTBe certain to follow the manufacturer’s instructions for connecting to the machine.
Leak Test
CHECK REFRIGERANT LEAKAGE USING ELECTRICAL LEAK DETECTORWARNING:
Never check refrigerant leakage while the engine is running.CAUTION:
Be careful of the ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
...
Rear Camera
Removal and Installation
REMOVALRemove the back door finisher. Refer to Removal and Installation.
Remove the rear camera mounting screws , then remove the rear camera .
INSTALLATIONInstall in the reverse order of removal.
Perform parameter writing. (With ProPILOT Assist 2.1) Refer to Work Procedur ...