Nissan Armada 2025-2026 Service and Repair Manual: Rear Fillet Molding Rear

Removal and Installation

REMOVAL Apply protective tape (A) on the part to protect it from damage. Insert a remover tool (A) between rear fillet molding front and rear door panel, cut double-sided tape using a cutter (B) whi ...

Removal and Installation

REMOVAL Remove rear fillet molding rear fixing clips and screws . Apply protective tape (A) on the part to protect it from damage. Insert a remover tool (A) between rear fillet molding rear and r ...

Other materials:

Work Flow
OVERALL SEQUENCE Reference 1··· Refer to Consult Function. Reference 2··· Refer to DTC Index. Reference 3··· Refer to Symptom Table. DETAILED FLOW INTERVIEW AND SYMPTOM CONFIRMATION Check the malfunction symptoms by performing the following items. Check the symptom. Is the occurred sympt ...

Work Procedure
PERFORM SYSTEM INITIALIZATION Close moonroof and sunshade. Press and hold the moonroof switch CLOSE for approximately 10 seconds. Moonroof and sunshade will move as following. Moonroof tilt up, and the sunshade slightly close and stops. Release the moonroof switch, and continue to press the moonroof ...

LiquidGasket
LIQUID GASKET APPLICATION PROCEDURE Remove old liquid gasket adhering to the liquid gasket application surface and the mating surface. Remove liquid gasket completely from the liquid gasket application surface, mounting bolts, and bolt holes. Wipe the liquid gasket application surface and the matin ...