CAUTION:
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace advanced ambient light (instrument panel passenger side) as a single part. Refer to Removal and Installation.
Removal and InstallationWork Procedure
Description
Calibration must be performed after replacing or removing/installing the following parts..
Head Up Display unit
Windshield glass
Steering member
Diagnosis Procedure
NOTE:
Place the vehicle on level ground.
Keep the space when calibration. (Vehicle front area)
Wide: 2.0 m (6.56 ft)
Heigh ...
Removal and Installation
REMOVAL
Remove front door outside molding. Refer to Removal and Installation.
Remove front door glass run of upper side. Refer to Removal and Installation.
Remove front door weather-strip of upper side. Refer to Removal and Installation.
Apply protective tapes (A) on the part to protect it from dama ...
Work Support
For each work support, follow the procedure shown in CONSULT.
The table below shows the additional explanations provided in the CONSULT.
CAUTION:
At the end of the work, be sure to perform a “Vehicle height adjustment” and adjust the vehicle to NORMAL height before returning it to the customer.
...