Exploded View
 |
Roof antenna | ||||
 |
: N·m (kg-m, in-lb) | ||||
Removal and Installation
REMOVAL
Remove the headlining assembly. Refer to Removal and Installation.
Disconnect the antenna feeder connector.
Remove the mounting nut
.
Remove the roof antenna from the vehicle.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may be deformed, when roof antenna mounting bolt tightening torque is loose.
Other materials
I-BSI driving situations
Indicator on
Indicator off
Indicator flashing
Illustration 1 - Approaching from behind
Another vehicle approaching from behind
Illustration 1: In the Nissan Armada, the side indicator light will illuminate
when a vehicle enters the detection zone from the rear in an adjacent lane, h ...
Engine Assembly
Exploded View
Engine mounting bracket (RH)
Engine mounting insulator (RH)
Stopper bracket (RH)
Engine mounting bracket (LH)
Engine mounting insulator (LH)
Stopper bracket (LH)
Engine mounting insulator (rear)
Comply with the assembly procedure wh ...
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...