Nissan Armada 2025-2026 Service and Repair Manual: Steps and Process
Each step and process should be described in detail. See below the steps:
| Details | ||
| Repair preparation | Repair method confirmation | Check the contents of the repair sheet and the work procedure. |
| Preparation of tools and equipment | Prepare the necessary tools and equipment. | |
| Associated and ancillary work | Remove any outer panels, exterior parts, interior parts and functional parts that will impede the work. | |
| Basic repair work | Mounting | Secure the body to frame aligner. |
| Preparatory measurement | Assess the level of damage before starting repair. | |
| Dimension restoration | Restore the inner panel parts and frame parts to correct dimensions. | |
| Panel shape restoration work | Panel shape restoration | After completing the basic repair work, restore any remaining deformation. |
| Parts replacement work | Removal of replacement parts | Remove parts on the body side where you will perform replacement.. |
| Preparation of body side | Perform finishing on the contact surface of the body side so new part can be welded. | |
| Preparation of new parts side | Perform preparations for welding, such as processing the contact surfaces of the new parts. | |
| New parts attachment | Weld the new parts to the body. | |
| Apply body sealant and an undercoating. | ||
| Basic repair work | Dismounting | Lower the body from frame aligner. |
| Paint coat work 1 | Painting of repair area 1 | Paint the inner panel parts and frame parts, and the back surfaces of the outer panels. |
| Post-repair work 1 | Associated and ancillary work | Attach the removal outer panels, functional parts and interior parts.. |
| Paint coat work 2 | Painting of repair areas 2 | Paint the outer panel. |
| Post-repair work 2 | Associated and ancillary work | Attach the removal exterior parts. |
| Complete work inspection | Perform inspection of the final finish and function. | |
| Putting away tools and equipment | Put away the tools and equipment. | |
Securing the Vehicle
To prevent the movement of vehicle, use a suitable method that can resist the pulling force required for repair.
(1) ANCHORING POINT
For passenger vehicle
CAUTION:
Choose the foundation of a rigi ...
Other materials:
Exploded View
Roof rear garnish Luggage room lamp : Pawl : Vehicle front ...
Removal and Installation
CAUTION:
Never bend the fixing pawl of front armrest LH.
REMOVAL
Remove front door finisher LH. Refer to Removal and Installation.
Disconnect power window main switch harness connector and door lock and unlock switch harness connector.
Remove front door squawker LH from front door finisher LH (if eq ...
Removal and Installation
REMOVAL
Seat Belt Retractor (LH and RH)
Remove third seat assembly. Refer to Removal and Installation.
Remove anchor plate mounting anchor bolt .
Remove shoulder anchor.Remove back pillar garnish. Refer to Removal and Installation. Remove shoulder anchor mounting anchor bolt , and then remove shou ...
0.0058