Moonroof
Description
-
Auto operation of moonroof does not operate.
-
Moonroof stops halfway.
-
Anti-pinch function operates.
Diagnosis Procedure
CHECK GLASS LID
Check the following items.
-
Cracks, damage, or deformation of weather-strip.
-
Sticking of weather-strip.
-
Loose or missing glass lid mounting bolt.
-
Misalignment of glass lid. Refer to Adjustment.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK WIND DEFLECTOR
Check wind deflector for deformation and interference. Refer to Removal and Installation.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF UNIT ASSEMBLY
Check the following items.
-
Damage, deformation or trapped foreign material of slide rail.
-
Insufficient application of grease to sliding section of slide rail. Refer to Removal and Installation.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed. Refer to Description.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Repair or replace the malfunctioning parts.
Sunshade
Description
-
Auto operation of sunshade does not operate.
-
Sunshade stops halfway.
-
Anti-pinch function operates.
Diagnosis Procedure
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed. Refer to Description.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 3.
CHECK COMMUNICATION SIGNAL CIRCUIT
Check communication signal circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>Replace sunshade motor assembly. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials
Differential Assembly
Exploded View
Side oil seal
Rear final drive assembly
Rear cover
Gasket
Drain plug
Stud bolt
Filler plug
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
: Apply Genuine Liquid Gasket, Three Bond 1217 or equivalent. Refer to Recom ...
Front Seat
Exploded View
REMOVAL
Headrest
Front seat assembly
(passenger seat)
Front seat assembly
(driver seat)
Seat leg cover
: Pawl
: N·m (kg-m, ft-lb)
DISASSEMBLYDriver Seat WITH 8WAY POWER SEAT SYSTEM
Headrest holder (lock)
Headrest holder (free)
Sea ...
Steering Assist Switch
Removal & Installation
REMOVALRemove instrument pad A. Refer to Removal and Installation.
Remove mounting screws , and remove switch panel from instrument pad A .
Unhook the pawls to remove the switch from the switch panel .
INSTALLATIONInstallation is in the reverse order of removal. ...