Work Procedure
Excessive Operation FrequencyWork Procedure
Description
When AV control unit is replaced, AV control unit configuration is required.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to Removal & Installation.
>>
GO TO 2
PERFORM AV CONTROL UNIT PROGRAMMING & CONFIGURATION
CONSULT
Perform AV control unit programming, accor ...
Removal and Installation
CAUTION:
Never bend the fixing pawl of rear armrest.
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Disconnect rear power window switch harness connector.
Remove rear armrest fixing screws , and then remove rear armrest from rear door finisher .
: Pawl
Remove rear power ...
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect automatic back door control unit harness connector.
Remove automatic back door control unit mounting nuts , and then remove automatic back door control unit .
INSTALLATION
Install in the reverse order of r ...