NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Owner's Manual: System operation

Nissan Armada 2025-2026 Owner's Manual / Starting and driving / Front and rear sonar system / System operation

The Nissan Armada sonar system provides both visual and audible alerts under the following conditions:

  • Detection of front obstacles when the transmission is in D (Drive)
  • Detection of both front and rear obstacles when the transmission is in R (Reverse)

How the system alerts of obstacles:

The Nissan Armada sonar system automatically deactivates at speeds above approximately 6 MPH (10 km/h) and reactivates when the vehicle slows down.

The intermittent warning tone will stop a few seconds after the distance to a stationary object stabilizes or when the object is no longer detected.

When an obstacle is first detected, a green indicator appears and blinks while an intermittent tone sounds. As the Nissan Armada approaches the object, the indicator changes to yellow and the tone frequency increases. When the vehicle is very close, the indicator turns red and remains steady, accompanied by a continuous warning tone.

Nissan Armada sonar system visual distance indicator example
Example

As the Nissan Armada moves closer to an obstacle, the sonar detection area is displayed in the vehicle information screen, providing clear visual guidance.

Nissan Armada sonar indicator on camera display with obstacle detection
Example

The sonar indicators are also integrated into the camera view on the Nissan Armada touchscreen display, enhancing driver awareness and making parking and maneuvering more precise and confident.

    Other materials

    Fuel System
    Hydraulic Layout EVAP canister purge volume control solenoid valve EVAP resonator EVAP line Fuel line Fuel tank Fuel filler neck EVAP canister         Quick Connector CAUTION: After connecting fuel tube quick connectors, check quick connectors are secur ...

    Additional Service When Replacing Transfer Control Unit
    Description When replacing transfer control unit, the following work is required. For the work procedure, refer to Work Procedure.WORK AFTER REPLACEMENT Unit parameter writing Initial calibration Work Procedure WRITING THE REQUIRED INFORMATION FOR CONTROL UNIT REPLACEMENT With CONSULT Ignitio ...

    Additional Service When Replacing Bcm
    Description CAUTION: When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle. When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing s ...