NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Torque Converter Clutch Point Learning

Nissan Armada 2025-2026 Service and Repair Manual / Transmission & Driveline / Transaxle & Transmission. 9at: Ge9r01a / Torque Converter Clutch Point Learning

Descripton

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

TCM memorizes a torque converter clutch meet point, and this enables accurate control.

Torque converter clutch point learning must be performed when the following operation is performed. For work procedure, refer to Work Procedure.

  • Replacing control valve & TCM

  • Replacing torque converter

Work Procedure

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

CHECK DTC

With CONSULT

  1. Start the engine.

  2. Check DTC of all systems.

Is any DTC detected.

YES>>

Check DTC detected item.

NO>>

GO TO 2.

PERFORM TORQUE CONVERTER CLUTCH POINT LEARNING

With CONSULT

  1. Check that the A/T fluid temperature is in the range of 60°C to 100°C (140°F to 212°F).

  2. Check that the engine coolant temperature is in the range of 70°C to 110°C (158°F to 230°F).

  3. Turn off air conditioner.

  4. Apply the parking brake.

  5. Release the accelerator pedal, depress the brake pedal and stop the vehicle completely.

  6. Shift to the D position.

  7. Select “Work supports” in “TRANSMISSION”.

  8. Select "Torque converter clutch point learning".

  9. Perform learning according to the CONSULT display.

>>

WORK END

    Other materials

    Unit Parameter Writing
    Description After working the following, transfer unit parameter must be written to transfer control unit. Transfer control unit replacing Transfer assembly replacing Transfer control actuator replacing Transfer range position sensor replacing Transfer cam position sensor replacing Transf ...

    Transfer Range Position Sensor
    Exploded View Transfer assembly Transfer range position sensor     : N·m (kg-m, in-lb)         Removal and Installation WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air sus ...

    No Output from Ac 120 V Outlet
    Diagnosis Procedure CHECK FAIL-SAFE ACTIVATION Check if the symptom is caused by a fail-safe operation. Refer to Fail-Safe. Is fail-safe operating? YES>> Repair the part causing fail-safe operation. NO>> GO TO 2. CHECK INVERTER UNIT POWER SUPPLY CIRCUIT Check inverter unit power supply ...