- Precautions
- 9at: Ge9r01a Tools and Preparation
- Diagnosis and Repair Work Flow
- Additional Service When Replacing Transmission Assembly
- Additional Service When Replacing Control Valve & Tcm
- Additional Service When Replacing Electric Shift Selector
- Additional Service When Replacing Sub-Tcm
- Torque Converter Clutch Point Learning
- Calibration of Decel G Sensor
- Mac Key Writing
- A/t Fluid Cooler
- Shift Position
- Symptoms and Troubleshooting
- A/t Fluid
- Electric Shift Selector
- Sub-Tcm
- Oil Pan
- Control Valve & Tcm
- Air Breather Hose
- A/t Fluid Warmer
- A/t Fluid Cooler
- A/t Fluid Cooler Tube
- Water Hose
- Transmission Assembly
- Torque Converter and Converter Housing Oil Seal
Other materials
Basic information
WARNING
Riding in the cargo area of a Nissan Armada is extremely hazardous. In
the event of a collision, occupants in these areas face a significantly higher
risk of severe injury or fatal consequences.
Never allow passengers to occupy any part of the Nissan Armada that is
not specifi ...
Front Door Module Assembly
Removal and Installation
REMOVALCAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.Remove front door glass. Refer to Removal and Installation.
Disconnect harness connectors , and then disengage harnesses fixing clips.
: Clip
Remove hole seals from fro ...
Side Camera
Removal and Installation
REMOVAL
Remove the door mirror finisher. Refer to Disassembly and Assembly.
Remove the side camera mounting screw , and then remove the side camera .
INSTALLATIONInstall in the reverse order of removal.
Perform parameter writing. (With ProPILOT Assist 2.1) Refer to Work ...