Preparation
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
|
Drift a: 61.0 mm (2.402 in) dia. b: 56.3 mm (2.217 in) dia. |
|
Installing front oil seal |
|
Drift a: 66.3 mm (2.610 in) dia. b: 61.9 mm (2.437 in) dia. |
|
Installing rear oil seal |
|
Drift a: 68.6 mm (2.701 in) dia. b: 58.0 mm (2.283 in) dia. |
|
Installing input oil seal |
| Power tool |
|
Loosening bolts and nuts |
Sealant or/and Lubricant
| Name | Description |
|---|---|
|
Genuine Liquid Gasket (Loctite 598 or equivalent) |
Application to mating surface of rear case |
Other materials
Rear Drive Shaft
Exploded View
Circular clip
Dust shield
Housing
Snap ring
Ball cage/steel ball/inner race assembly
Stopper ring
Boot band
Boot
Shaft
Joint sub-assembly
: Wheel side
1: NISSAN genuine grease or an equivalent.
2: Apply paste [serv ...
Vehicle Jerks During
Diagnosis Procedure
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function or trailer sway control function operates.CHECK SYMPTOM
Check ...
Inverter Unit
Exploded View
Bracket LH
Inverter unit
Bracket RH
:N·m (kg-m, in-lb)
Removal and Installation
REMOVALRemove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect inverter unit harness connector.
Remove inverter unit mounting nuts.
Remove the bracket from the i ...