Preparation
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
|
Drift a: 61.0 mm (2.402 in) dia. b: 56.3 mm (2.217 in) dia. |
|
Installing front oil seal |
|
Drift a: 66.3 mm (2.610 in) dia. b: 61.9 mm (2.437 in) dia. |
|
Installing rear oil seal |
|
Drift a: 68.6 mm (2.701 in) dia. b: 58.0 mm (2.283 in) dia. |
|
Installing input oil seal |
| Power tool |
|
Loosening bolts and nuts |
Sealant or/and Lubricant
| Name | Description |
|---|---|
|
Genuine Liquid Gasket (Loctite 598 or equivalent) |
Application to mating surface of rear case |
Other materials
Rear Wheel Hub and Housing
Exploded View
Ball seat
Axle housing
Bushing
Baffle
Back plate
Hub bolt
Wheel hub and bearing assembly
Disc rotor
Wheel hub lock nut
Cotter pin
Tightening must be done following the installation procedure. Refer to Removal and Installat ...
Refrigeration System Symptoms
Trouble Diagnosis For Unusual Pressure
Diagnose using a manifold gauge whenever system’s high and/or low side pressure(s) is/are unusual. The marker above the gauge scale in the following tables indicates the standard (usual) pressure range. Refer to above table (Ambient air temperature-to-operati ...
Steering Torque Calibration
Work Procedure
After replacing the ADAS control unit 2 and after replacing or removing the following steering components, the steering torque calibration is necessary to operate the system normally.
Steering wheel
Spiral cable
Steering angle sensor
Steering column assembly
Steering gear ass ...