Nissan Armada 2025-2026 Service and Repair Manual: Wastegate Valve Closed Position Learning
Wastegate valve closed position learning is a function of ECM to learn the fully closed position of the wastegate valve by monitoring the wastegate valve position sensor output signal. It must be performed under any of the following conditions.
Work Procedure
START
With CONSULT
Ignition switch ON.
On CONSULT screen, select “ECM”>>“Work support”>>“Close throttle position learning”.
Follow the instructions on the CONSULT display.
Igni ...
Work Procedure
PERFORM WASTEGATE VALVE CLOSED POSITION LEARNING VALUE CLEAR
With CONSULT
On the CONSULT screen, select “ECM” >> “Work support” >> “WASTEGATE ACTUATOR POSI LEARN VALUE CLEAR”.
...
Other materials:
Work Flow
WORK FLOW
STEP DESCRIPTION STEP 1 Get detailed information about the conditions and the environment when the incident occurred.
The following are key pieces of information required to make a good analysis: WHAT Vehicle Model, Engine, Transmission/Transaxle and the System (i.e. Radio). WHEN D ...
RearView Monitor system limitations
WARNING
The Nissan Armada RearView Monitor has certain operational limitations that
must always be taken into account. Ignoring these limitations or relying solely
on the system without proper visual checks may result in serious injury or even
fatal accidents.
The Nissan Armada camera sys ...
Vehicle load capacity
Basic information
Before operating a loaded Nissan Armada, always verify that the total vehicle
weight does not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross
Axle Weight Rating (GAWR). These critical limits are clearly indicated on the F.M.V.S.S./C.M.V.S.S.
certificatio ...
0.0073