Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
START
Make sure that accelerator pedal is fully released.
Ignition switch ON and wait at least 2 seconds.
Ignition switch OFF and wait at least 10 seconds.
Ignition switch ON and wait at least 2 seconds.
Ignition switch OFF and wait at least 10 seconds.
END
Accelerator Pedal Released Position Learning
Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It mu ...
Electric Ivt Control Actuator Position Learning
Electric intake valve timing control (IVT) module requires the learning of camshaft reference position.
This learning must be performed where the following operations are performed:
Replacement of el ...
Other materials:
Inspection
If a A/C compressor is malfunctioning (internal noise, insufficient cooling), check the compressor oil.
COMPRESSOR OIL JUDGMENT
Remove the A/C compressor. Refer to Removal and Installation.
Sample a compressor oil and judge on the figure.
Judgement result 1
Replace A/C compressor only.
Judgement r ...
Layout
Air suspension RH duct assembly Air tube (rear RH air spring) Rear RH air spring Rear RH shock absorber Air tube (front RH shock absorber) Front RH Shock absorber (With Built In Air Spring) Front LH Shock absorber (With Built In Air Spring) Air tube (front LH shock absorber) Protector Air ...
Exploded View
Rear final drive assembly Side oil seal : Vehicle front : Always replace after every disassembly. ...
0.006