Description
After replaced air bag diagnosis sensor unit, it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.
Work Procedure
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to Removal & Installation.
>>
GO TO 2.
WRITING vehicle SPECIFICATION
Perform configuration for air bag diagnosis sensor unit. Refer to Description.
>>
WORK END
Other materials
How to switch the display
With the ignition switch in the ON position, the Nissan Armada Intelligent Around
View Monitor can be activated either by pressing the CAMERA/
button or by shifting the transmission into the R (Reverse) position.
Once activated, the Nissan Armada system automatically presents different split- ...
Front Door Glass
Removal and Installation
REMOVALCAUTION:
Never damage front door glass and front door panel.Remove front door pull handle bracket. Refer to Removal and Installation.
Remove front door sash inner cover. Refer to Removal and Installation.
Remove hole seals from front door panel.
Reconnect power win ...
Telltale Does Not Lamp When Ignition Switch Is Off to on
Diagnosis Procedure
CHECK TELLTALE (BULB CHECK)
Check the telltale "BULB CHECK" below.
TelltaleRefer to "BULB CHECK"
ABS warning lamp
Refer to ABS Warning Lamp.
Brake system warning lamp
Refer to Brake System Warning Lamp.
Electronic parking brake warning lamp
Refer to Electric Parking Brake Warni ...