Removal and Installation
REMOVAL
Remove back door assembly. Refer to Removal and Installation.
Remove back door hinge mounting nuts, and then remove back door hinge.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Before installation, apply anticorrosive agent onto mounting surface.
-
When installation, perform the fitting adjustment. Refer to Adjustment.
-
After installation, check the open/close operation. Refer to Inspection.
-
After tightening, apply touch-up paint (the body color) if the paint around hinge and mounting nuts are peeled off during adjustment.
-
After installation, apply anticorrosive around the nuts to prevent rust.
Other materials
Cup holders
Basic information
CAUTION
In the Nissan Armada, avoid sudden acceleration or braking when using
the cup holders to prevent spills. Hot liquids may cause burns to you or your
passengers.
Use only soft or flexible containers in the Nissan Armada cup holders.
Hard objects may become haz ...
Suspension Arm
Exploded View
Frame
Stopper rubber
Suspension arm
Axle housing
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVALWithout Dynamic Digital Suspension and Electronic Air SuspensionRemove tires. Refer to ROAD WHEEL TIRE : Removal &a ...
Led Headlamp Operation Inspection
Work Procedure
CHECK START
In the cool LED status (wait for more than 10 minutes after turning headlamp OFF), turn ON and turn OFF headlamp for the several times. Check that headlamp operates normally each time.
In the cool LED status, turn headlamp ON, wait until headlamp enters to the stable s ...