Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Heavy Tight-Corner Braking Symptom Occurs

Description

Heavy tight-corner braking symptom occurs when the vehicle is driven and the steering wheel is turned fully to either side after the engine is started.

NOTE:

Light tight-corner braking symptom may occur depending on driving conditions. This is not malfunction.

Diagnosis Procedure

PERFORM ECM SELF-DIAGNOSIS

With CONSULT

Perform self-diagnosis for “ECM”.

Is any DTC detected?

YES >>

Check DTC detected item. Refer to DTC Index.

NO>>

GO TO 2.

PERFORM SELF-DIAGNOSIS

With CONSULT

Perform self-diagnosis for "AWD/4WD".

Is any DTC detected?

YES>>

Check the DTC Refer to DTC Index.

NO>>

GO TO 3

CHECK TRANSFER INTERNAL FUNCTION

Perform mode switching from AUTO to 4H.

Has the mode switching been completed?

YES>>

Perform writing of the unit parameter and end the diagnosis. Refer to Work Procedure.

NO>>

Transfer assembly is mechanical malfunction. Replace transfer assembly. Refer to Removal and Installation.

    Other materials

    RearView Monitor system limitations
    WARNING The Nissan Armada RearView Monitor has certain operational limitations that must always be taken into account. Ignoring these limitations or relying solely on the system without proper visual checks may result in serious injury or even fatal accidents. The Nissan Armada camera sys ...

    For Frontal Collision
    When SRS is activated in a collision CAUTION: Due to varying models and option levels, not all parts listed in the chart below apply to all Nissan Armada vehicles.WORK PROCEDURE Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed. ...

    Push-Button Ignition Switch
    Removal and Installation REMOVALRemove instrument pad B. Refer to Removal and Installation. Disengage the fixing pawls using a remover tool (A) and then remove push-button ignition switch from instrument pad B. : Pawl INSTALLATIONInstall in the reverse order of removal. ...