Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Low Tire Pressure Location Indicator Continues Displaying

Description

The low tire pressure location indicator continues displaying though low tire pressure warning lamp turns/stays OFF.

Diagnosis Procedure

CHECK TIRE PRESSURE

  1. Ignition switch ON.

    CAUTION:

    Never start the engine.

  2. Check the tire pressure for all wheels and adjust to the specified value. Refer to TIRE AIR PRESSURE : Service Data.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Inspect or repair the tires or wheels.

CHECK LOW TIRE PRESSURE LOCATION INDICATOR

Check low tire pressure location indicator.

Does low tire pressure location indicator continues displaying?

YES>>

GO TO 3.

NO >>

INSPECTION END

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

Perform self-diagnosis for "AIR PRESSURE MONITOR� of “BCM�.

Is DTC detected?

YES>>

Perform DTC diagnosis procedure. Refer to DTC Index.

NO>>

GO TO 4.

CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Perform the trouble diagnosis for power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Replace BCM. Refer to Removal and Installation.

NO>>

Repair or replace error-detected parts.

    Other materials

    BSW system limitations
    WARNING The following limitations apply to the Nissan Armada Blind Spot Warning (BSW) system. Ignoring these limitations or relying solely on the system may lead to serious injury or even fatal accidents. The Nissan Armada BSW system is not capable of detecting every vehicle or object in ...

    Radiator Core Seal
    Removal and Installation REMOVALApply protective tape (A) on the part to protect it from damage. Disengage radiator core seal fixing clips using a remover tool (A), and then remove radiator core seal . : Clip INSTALLATIONInstall in the reverse order of removal. ...

    Glove Box Lamp
    Exploded View Glove box lamp is integrated structure with glove box assembly. For exploded view of instrument panel assembly, refer to Exploded View. Replacement CAUTION: Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leak ...