- Road Wheels & Tires Tools and Preparation
- Diagnosis and Repair Work Flow
- Additional Service When Replacing Bcm
- Tire Pressure Sensor Id Registration
- Tire Pressure Monitoring System Symptom
- Low Tire Pressure Warning Lamp Does Not Turn on
- Low Tire Pressure Warning Lamp Does Not Turn Off
- Low Tire Pressure Warning Lamp Blinks
- Low Tire Pressure Location Indicator Does Not Display
- Low Tire Pressure Location Indicator Continues Displaying
- Id Registration Cannot Be Completed
- Easy Fill Tire Alert Does Not Activate
- Noise, Vibration and Harshness (nvh) Troubleshooting
- Road Wheels & Tires
- Road Wheel Tire
- Spare Tire and Wheel Assembly
- Tire Pressure Sensor
Other materials
Mac Key Writing
Description
When replacing ECM, it is necessary to write MAC key to ECM. Write MAC key to ECM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.CAUTION:
During MAC key writing, maintain the following conditions:
Ignition switch ON
CONSULT is connecte ...
Adjustment of Steering Angle Sensor Neutral Position
Description
Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure Adjust the neutral position of steering angle sensor
Removing/ installing ABS actuator and electric un ...
Preparations
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
NISSAN Squeak and Rattle Kit
Repairs the cause of noise
C ...