Description
When replacing sub-TCM, it is necessary to write MAC key to sub-TCM. Write MAC key to sub-TCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.
CAUTION:
During MAC key writing, maintain the following conditions:
-
Ignition switch ON
-
CONSULT is connected to internet
Work Procedure
PERFORM MAC KEY WRITING
-
Ignition switch ON.
-
Select "MAC Key writing" on "Work supports" of "Sub-TCM" using CONSULT.
-
Touch "Write".
>>
WORK END
Other materials
About microSD card
WARNING
Never allow children to handle or play with the microSD card used in your
Nissan Armada. Due to its small size, accidental swallowing may occur, which can
lead to choking, serious injury, or even life-threatening situations.
NOTE:
If the microSD card is removed from the Nissan Armada ...
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and SUSPECTED PARTS Symptom Reference
Noise
Gear tooth rough
×
—
Gear contact improper
×
—
Tooth surfaces worn
×
—
Backlash ...
Anti-Pinch Inspection
Description
Check anti-pinch function when the initialization of moonroof and sunshade system is performed. Refer to Work Procedure.
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the moonroof.
Place a piece of wood near the fully closed position.
Close the moonroof completely with auto c ...