Preparation
Special Service Tools
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
KV10122000 (NI-53383) Side oil seal puller |
|
Removing side oil seal |
|
KV10123000 (NI-53384) Side oil seal installer |
|
Installing side oil seal |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Sliding hammer |
|
Removing side oil seal [Use with KV10122000 (NI-53383)] |
| Power tool |
|
Loosening bolts and nuts |
Sealant or/and Lubricant
| Item | Use |
|---|---|
|
Genuine Liquid Gasket (Three Bond 1217 or equivalent) |
Application to mating surface of rear cover |
Other materials
I-FCW system operation
The Nissan Armada I-FCW system becomes active at speeds above approximately 3
MPH (5 km/h), ensuring functionality during most driving scenarios.
When a potential forward collision risk is detected, the Nissan Armada system
immediately alerts the driver by flashing the vehicle-ahead detecti ...
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...
Brake Pedal
Exploded View
Stroke sensor
Clevis pin
Brake pedal assembly
Brake pedal pad
Snap pin
Stop lamp switch
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Apply Nissan multi-purpose Special Grease No.2 or equivalent.
: Always replace after every disassembly.
Removal and ...