FRONT BRAKE CALIPER ASSEMBLY : Inspection
Brake PadPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Starter Motor
Engine VR35DDTT Type M001TF1771 MITSUBISHI make Reduction gear type System voltage (V) 12 No-load Terminal voltage (V) 11 Current (A) Less than 110 Revolution (rpm) More than 2,890 Clearance "L" between pinion front edge and pinion stopper [mm (in)] 0.5 - 2.0
(0.020 - 0.079) ...