NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Second Seat (bench Seat)

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Seat / Second Seat (bench Seat)

Exploded View

REMOVAL

Outer headrest

Second seat assembly

(RH seat) 		Outside seat leg cover (RH seat)
Inside seat leg cover (RH seat) Inside seat leg cover (LH seat) Outside seat leg cover (LH seat)

Second seat assembly

(LH seat) 		Center rail finisher Center headrest
: Pawl
: N·m (kg-m, ft-lb)

DISASSEMBLY

LH Seat

Seatback lever unit Seatback lever unit cap Headrest holder (lock)
Headrest holder (free) Seat belt retractor cover Seat belt retractor cover cap
Center seatback assembly Seat cushion trim Seat cushion pad
Inside seat cushion finisher outer Reclining strap Inside seat cushion finisher inner
Center seatback hinge cover RH Center seatback hinge cover LH Inside seat cushion lower cover outer
Inside seat cushion lower cover inner Seat frame assembly Outside seat cushion lower cover inner
Outside seat cushion lower cover outer Outside seat cushion finisher inner Outside seat cushion finisher outer
Reclining knob cap Reclining knob Outside slide finisher
Outside striker cover Inside striker cover Inside slide finisher
Seatback trim Seatback pad Center seat belt guide
Seat belt guide cap Seatback lever unit escutcheon Tether anchor finisher
Center seatback trim assembly Center seatback frame Armrest hinge
Armrest hinge bracket RH Armrest hinge cover RH Armrest
Center seatback panel Armrest hinge cover LH Armrest hinge bracket LH
: Clip
: Pawl
: Metal clip
, : Indicates that the part is connected at points with same symbol in actual vehicle.

RH Seat

Tether anchor finisher Inside striker cover Outside striker cover
Outside slide finisher Reclining knob Reclining knob cap
Outside seat cushion finisher outer Outside seat cushion finisher inner Outside seat cushion lower cover outer
Outside seat cushion lower cover inner Seat frame assembly Inside seat cushion lower cover inner
Inside seat cushion lower cover outer Inside seat cushion finisher inner Inside seat cushion finisher outer
Seat cushion pad Seat cushion trim Seatback pad
Seatback trim Headrest holder (lock) Headrest holder (free)
Seatback lever unit cap Seatback lever unit Inside slide finisher
Seatback lever unit escutcheon        
: Clip
: Pawl
: Metal clip

Removal and Installation

CAUTION:

  • When removing and installing, use shop cloths to protect parts and vehicle from damage.

  • Always work with 2 workers, because it is heavy weight.

REMOVAL

Remove headrest.

Slide second seat to front most position.

Disengage fixing pawls using a remover tool (A) according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove center rail finisher (LH seat).

: Pawl

Remove rear side mounting bolts of second seat assembly.

Slide second seat to rear most position.

Remove inside and outside seat leg cover.

  • LH seat

    Disengage fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove inside seat leg cover (LH seat) and outside seat leg cover (LH seat) .

    : Pawl

  • RH seat

    Disengage fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove outside seat leg cover (RH seat) and inside seat leg cover (RH seat) .

    : Pawl

Remove front side mounting bolts of second seat assembly.

Pull up second seat to rearward.

Disengage body harness fixing clip, and then disconnect harness connector.

CAUTION:

Before performing removal operation, check the installation position of harness connector and harness fixing clip.

Remove second seat assembly from vehicle.

NOTE:

If disassemble second seat after removing, move second seat to walk in condition to ensure the workspace for disassembling seat cushion finisher.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • Before installing seat to vehicle, check the slide rail locking position which inner and outer side. They should be locking same position.

  • Before tightening seat mounting bolt, check that carpet is not caught in seat mounting bolt hole.

  • When installing, tighten mounting bolts according to the numerical order 1→4 or 1→5 as shown in the figure.

    • LH seat

    • RH seat

  • Tighten seat mounting bolts to the specified torque. Refer to Exploded View.

Other materials

Diagnosis and Repair Work Flow
Work Flow OBTAIN INFORMATION ABOUT SYMPTOM Refer to Diagnostic Work Sheet and interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred) as much as possible when the customer brings in the vehicle. >> GO TO 2. CHECK DTC Before ch ...

Refrigerant
Description CONNECTION OF SERVICE TOOLS AND EQUIPMENTBe certain to follow the manufacturer’s instructions for connecting to the machine. Leak Test CHECK REFRIGERANT LEAKAGE USING ELECTRICAL LEAK DETECTORWARNING: Never check refrigerant leakage while the engine is running.CAUTION: Be careful of the ...

Precautions
Precautions for Body Repair WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System. WAR ...