NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Second Seat Cushion

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Seat / Second Seat (captain Seat) / Second Seat Cushion

Disassembly and Assembly

DISASSEMBLY

Remove seatback trim and pad. Refer to Disassembly and Assembly.

Disengage seat cushion trim fixing retainers .

Disengage seat cushion trim fixing retainers .

Disengage harness fixing clip of seat cushion, and then disconnect harness connector.

CAUTION:

Before performing removal operation, check the installation position of harness connector and harness fixing clip.

Remove seat cushion trim and pad as a set from seat frame assembly.

Remove hog rings, and then separate seat cushion trim and pad.

CAUTION:

  • Before removing hog rings, check its position because it should be installation in position.

  • Never disassemble seat cushion pad and seat cushion heater (if equipped).

ASSEMBLY

Note the following items, and then assemble in the reverse order of disassembly.

CAUTION:

  • Always install hog ring in position.

  • Never reuse hog ring after disassembly, using new hog ring.

  • Use new hog ring if removed or crimped unsuccessfully.

  • Be installed harnesses and harness fixing clips in position.

  • If harnesses clip be broken, replace with new clip and it install in position where marked before removing clip.

    Other materials

    System temporarily unavailable
    When any of the following messages appear on the vehicle information display, a chime will sound and the I-BSI system will be turned off automatically. "Unavailable Slippery Road": When the VDC system (except traction control system function) or ABS operates. "Currently Una ...

    9at: Ge9r01a Tools and Preparation
    Preparation Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (NI-52940) Transmission jack adaptor Removing and installing A/T assembly — (NI-52972–2) OFT position change wrench Remov ...

    Glove Box Lid Lock Cylinder
    Exploded View Glove box assembly Sleeve Glove box lid lock cylinder Removal and Installation REMOVAL NOTE: Glove box lid lock key cylinder is integrated with glove box assembly. So, glove box lid lock key cylinder cannot be removed from glove box assembly and it cannot be replaced without ...