Nissan Armada 2025-2026 Service and Repair Manual: Second Seat (captain Seat)

Exploded View

REMOVAL

	Headrest		Second seat assembly (RH seat)		Outside seat leg cover
	Inside seat leg cover		Second seat assembly (LH seat)
	: Pawl
	: N·m (kg-m, ft-lb)

DISASSEMBLY

LH Seat

	Seatback lever unit cap		Seatback lever unit		Headrest holder (lock)
	Headrest holder (free)		Seatback trim		Seatback pad
	Seat cushion trim		Seat cushion pad		Armrest
	Armrest cover		Inside seat cushion finisher outer		Inside seat cushion finisher inner
	Inside seat cushion lower cover outer		Inside seat cushion lower cover inner		Seat frame assembly
	Outside seat cushion lower cover inner		Outside seat cushion lower cover outer		Outside seat cushion finisher inner
	Outside seat cushion finisher outer		Reclining knob cap		Reclining knob
	Outside slide finisher		Outside striker cover		Inside striker cover
	Tether anchor finisher		Inside slide finisher		Seatback lever unit escutcheon
	: Clip
	: Pawl
	: Metal clip

RH seat

	Inside striker cover		Outside striker cover		Outside slide finisher
	Reclining knob		Reclining knob cap		Outside seat cushion finisher outer
	Outside seat cushion finisher inner		Outside seat cushion lower cover outer		Outside seat cushion lower cover inner
	Seat frame assembly		Inside seat cushion lower cover inner		Inside seat cushion lower cover outer
	Inside seat cushion finisher inner		Inside seat cushion finisher outer		Armrest cover
	Armrest		Seat cushion pad		Seat cushion trim
	Seatback pad		Seatback trim		Headrest holder (lock)
	Headrest holder (free)		Seatback lever unit		Seatback lever unit cap
	Tether anchor finisher		Inside slide finisher		Seatback lever unit escutcheon
	: Clip
	: Pawl
	: Metal clip

Removal and Installation

CAUTION:

• When removing and installing, use shop cloths to protect parts and vehicle from damage.

• Always work with 2 workers, because it is heavy weight.

REMOVAL

Remove headrest.

Slide second seat to front most position.

Remove rear side mounting bolts of second seat assembly.

Slide second seat to rear most position.

Disengage fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove inside seat leg cover and outside seat leg cover .

: Pawl

Remove front side mounting bolts of second seat assembly.

Pull up second seat to rearward.

Disengage body harness fixing clip, and then disconnect harness connector.

CAUTION:

Before performing removal operation, check the installation position of harness connector and harness fixing clip.

Remove second seat assembly from vehicle.

NOTE:

If disassemble second seat after removing, move second seat to walk in condition to ensure the workspace for disassembling seat cushion finisher.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

• Before installing seat to vehicle, check slide rail locking position which inner and outer side. They should be locking same position.

• Before tightening seat mounting bolt, check that carpet is not caught in seat mounting bolt hole.

• When installing, tighten mounting bolts according to numerical order 1→4 as shown in the figure. (Figure indicate LH seat, RH seat is symmetrical.)

  

• Tighten seat mounting bolts to the specified torque. Refer to Exploded View.

• Second Seatback
• Second Seat Cushion
• Second Seat Cushion Finisher